Fig. 10.34. Replacement of lamps of lighting fixtures

For replacement of a lamp hook an edge of lenses of lamps a penknife and replace a lamp (fig. 10.34).

Remove the right panel of the console on the tunnel.

After that remove blocks of illumination of an ashtray and the lever of the selector of the automatic transmission and replace a lamp.

The sequence of actions at removal of the panel of a heater:

Fig. 10.35. Removal of the panel of a heater

1) remove handles of management of a heater, hooking the small screw-driver a back part of the handle (fig. 10.35);

2) remove the forward panel (implant fingers into openings and carefully take out the panel).

Lamps are located behind the forward panel.

Fig. 10.36. Replacement of a lamp of a cosmetic mirror

Accurately weaken fastening of the lens of a mirror by means of the small screw-driver (fig. 10.36), remove it and replace a lamp.

The sequence of actions when replacing illumination of the switch of lighting:

Fig. 10.37. Replacement of a lamp of the switch of lighting

1) remove the lighting switch (fig. 10.37);

2) remove a cartridge of a lamp, having put forward it outside by means of kruglogubets and replace a lamp.