5.2. Technical characteristics
Coupling
|
NOTE
The Volvo S40/V40 car has one-disk dry coupling with the hydraulic drive.
|
|
NOTE
Jellied lubricant (a clutch release fork lever, bolts, bearings, axes) — Volvo 1161246-2.
|
|
PREVENTION
It is impossible to use other grades of oils!
|
|
NOTES
The description of the correct technique of measurement of side plays of half shafts see in the Management for service stations. It is impossible to mix lubricants of different types.
|
1 Values of a dovorot of bolts after an inhaling are specified by their main issue: in numerator — for the engine with an automatic box; in a denominator — for the engine with the mechanical transmission.
2 Oil does not need replacement. To replace oil with an interval of 75 000 km only for the cars which are continuously operated in the taxi mode or for the cars which are often used for towage of trailers. It is impossible to use other oils.
Mechanical transmission
Half shafts
3 M3P = JB3, the identifier on the transmission (it is executed by a nakatka). In the first cars there is a plate from above.
4 M5P/M5D = JC5, the identifier on the transmission (it is executed by a nakatka). In the first cars there is a plate from above.
5 3,73:1 in France.