For replacement of a protective cover (steering draft):

Fig. 7.33. Steering drive: 1 — a tip of steering draft; 2 — a lock-nut; 3 — steering draft; 4 and 6 — collars; 5 — a protective cover

— remove a tip of 1 (fig. 7.33) of steering draft with the spherical hinge;

— mark the provision of a lock-nut 2 turn off it;

— remove collars 4 and 6 and a protective cover 5 from steering draft;

— remove a lock ring;

— stick a gear segment with a tape;

Fig. 7.34. Removal of steering draft

— clamp two keys a segment and steering draft (fig. 7.34);

— remove steering draft;

— establish a new castle plate;

— establish steering draft by means of two keys, tighten the moment 88 N · m;

— remove a tape from a gear segment; fix steering draft on the place;

— put jellied lubricant 1161001-1 in a protective cover;

— establish a cover into place and fix by new collars;

— screw a lock-nut in former situation;

— establish a tip of steering draft;

— check a convergence of wheels.