Fig. 11.57. Removal of the panel of facing of a forward door: 1 — the audio system loudspeaker; 2 — screws of fastening of the panel (6 pieces); 3 — an armrest; 4 — the screw self-tapping screw of the handle of unlocking of a door; 5 — the case of the handle of unlocking of a door

You make removal of the panel of facing of a forward door (fig. 11.57) as follows:

— close a door window;

— remove an overlay of a mirror;

— remove the panel 1 dynamics of the audio system;

— turn out the screw self-tapping screw 4 handles of unlocking and take out the case 5 advance;

— remove the window regulator handle (it is fixed by a clamp) if it is available;

— remove slips and turn out screws 2;

— remove an armrest 3 (disconnect the mirror electric drive socket);

— pull together the facing panel from percussion caps from below and remove it the movement up.

Fig. 11.58. Removal of the panel of a back door: 1 — a back corner of glass of a door; 2 — screws of fastening of the panel (4 pieces); 3 — fastening of the handle of a window regulator (if the handle is installed); 4 — the screw self-tapping screw of the handle of unlocking of a door

You make removal of the panel of facing of a back door (fig. 11.58) as follows:

— close a door window;

— accurately remove a back corner 1;

— remove a slip and turn out the screw self-tapping screw 4 of the handle of unlocking of a door;

— turn out the screw self-tapping screw of the handle of unlocking and take out the case advance;

— remove the electrowindow regulator switch (if it is established) disconnect the socket;

— remove the window regulator handle (it is fixed by a clamp);

— remove slips and turn out screws self-tapping screws 2 in the lower part of the panel;

— pull together the facing panel from percussion caps from below and remove it the movement up;

— show care to its contact surface.