Fig. 11.70. The elements dismantled when replacing the mechanism of a window regulator of a back door: 1 — fixing screws (2 pieces); 2 — bolts of fastening of the lifting mechanism or electric motor; 3 — glass fastening bolts (4 pieces)

You make replacement of the mechanism of a window regulator of a back door (fig. 11.70) as follows:

— remove the panel of facing of a back door;

— remove an arm and isolation;

— lower glass and turn out fixing screws 1;

— lift glass and record an adhesive tape;

— disconnect glass 3 fastening;

— remove fastening of the lifting mechanism or electric motor 2;

— disconnect the socket and take the window regulator mechanism through the top aperture.

NOTE For power windows — at first turn the mechanism and take through the top aperture the electric motor forward.

NOTE The window regulator mechanism in spare parts is always delivered assembled.