Fig. 11.59. Removal of a door assembled

You make removal of a door in collecting (fig. 11.59) as follows:

— mark location of a loop;

— take out an adjusting pin (in need of it it is possible to press out);

— uncover a conducting plait a rack And or In;

— disconnect the socket outside, press a white latch in front (a forward door), or uncover a conducting plait (a back door);

— disconnect sockets (press a latch);

— turn out bolts from lateral face of a door.

Assembled you make installation of a door as follows:

— establish a door on tags and tighten bolts half;

— put an adjusting pin of the limiter of opening of a door;

NOTE Put an adjusting pin so that its cut was directed along the limiter of opening of a door.

— connect the socket and put a conducting plait cover in a rack In;

— adjust the provision of a door (see соотв. section);

— tighten bolts of loops of a door (the moment of an inhaling of 21 N · м).

NOTE For new doors at first remove a ring from a loop.